Growsun Adjustable Indoor Moving Grow Light Mover Kit With Motor And 7ft Rail For Hydroponic Lighting System
Mega Sale! Save 25% on the Growsun Adjustable Indoor Moving Grow Light Mover Kit With Motor And 7ft Rail For Hydroponic Lighting System by Growsun at Hotel Green House. Hurry! Limited time offer. Offer valid only while supplies last. Assembly Instrutions Step 1 slide the three pins into the end of one of the rails and tap each one in about half way Step 2 Line up the pins with the
Step 1 slide the three pins into the end of one of the rails and tap each one in about half way
Step 2 Line up the pins with the second rail and slide them together
Step 3 Tape the rails on solid ground to easily join them together
Step 4 Find the included"stop bracket"(see picture).Using the supplied screws,screw it onto one end of the rail.Wait to install the second "stop bracket"until the motor is installed.
Step 5 Using the supplied wood screws,mount the assembled rail onto your ceiling in its desired location.
LightRail moves your indoor grow lights over the tops of the plants, reducing shadow patterns and reducing heat, getting those grow lights closer for maximum use of available wattage, and getting the correct intensity of light on all the leaves for optimum Leaf Area Index (LAI) which is the single most important factor in increasing yield.
Features & Highlights
- Growsun Light Mover Include a 10RPM Motor,2 Pcs 7ft Rail,2 Kits of Pulley and Nuts for Installation
- 10r/min Drive Motor Has a Adjustable Time Delay From 2 to 120 Seconds For Pausing the Lamp at The End of Each Run, You Can Turn the Knob Clockwise to Set Delaying Time as the Plants Need.
- 7ft Length Rail,Made by Aluminium Alloy,Durable and Maximum Weight Support:10Kg(22pounds)
- Grow Lights With the Rail Mover Can Providing a well-proportioned illumination to The Plants
- The Light Mover Works Well With Most Grow Lights Within 10KG(22pounds)
|Package Weight:||7.4 pounds|
|Package Size:||6.6 x 6.3 x 6.3 inches|